18
(1) Press the "Display" button to set the display mode. After
selecting the percentage, it will directly navigate to the nominal value
settings in the comparison function. Press the OK button to
sequentially navigate the Upper Limit, Lower Limit, and Enable. In
the case of direct reading mode, users need to press the sorting button.
(2) Press the "sorting" button to set the upper/lower limits,
nominal value, and enable/disable the sorting function. Use the "↑"
and "↓" buttons to navigate through the options, and then press the
"OK" button to confirm the selection.
(3)
If the upper/lower limit function/nominal value is
selected, the digits in the LCD will display "00000", in which the
flashing digit/unit represents the currently modified value. Press the
"←" and "→" buttons to select the numerical value, decimal mark,
and unit to identify the flashing position to determine which digit is
being modified. Press the "↑" and "↓" buttons to modify the numerical
value, decimal mark position, and unit. After settings are adjusted,
press the "OK" button to navigate to Enable, and then press OK again
to confirm.
3.3.4 Beep Function
The Beep function can be configured, and the "↑" and "↓" buttons
can be used to select the alarm mode, as outlined below: