10
Note: "U_H_Lim" indicates values exceeding the upper limit,
"Pass" indicates values falling within the upper and lower limits, and
"D_L_ Lim" indicates values smaller than the lower limit.
4) Trigger Button (TRIG): For switching between continuous and
single trigger mode. Continuous triggering involves continuous
measurement, while single triggering requires selection between
manual and external triggering. For manual triggering, simply
press the trigger button to initiate a single measurement. To switch
back to continuous mode, press and hold the trigger button for 1
second. External triggering requires connection to external
communication for triggering via an external signal, as detailed in
the external interface section.
5) Backlight Button (
): For enabling/disabling the backlight.
6) Display Button (DISPLAY): For adjusting display mode between
direct reading/percentage.
7) Sorting (Comparison) Button (COMPARE): For setting the upper
and lower limit values in the direct reading/percentage modes.