![background image](http://html1.mh-extra.com/html/east-tester/et2725a/et2725a_user-manual_3446894005.webp)
2
1.3 Terminal Description
Figure 1.3-1
No.
Name
Description
①
Communication and
Charging connector
Connect the power adaptor to charge batteries or connect
the calibrator to the computer.
② ③
Measure V, mV, mA, Loop,
Ω and continuity test
terminals
Input terminals for measuring voltage, current, resistance,
and supplying loop power.The two terminals
electrical
isolate from the other
terminals.
④ ⑤
Measure and Source V, mV,
Hz, Ω, TC and RTD
terminals
Terminals for sourcing or measuring voltage, resistance,
frequency, RTD and TC.
⑤
is the
common
Terminal.
⑤ ⑥
Measure and Source mA ,
and 3W for Ω terminals
Terminals for sourcing or measuring current ,and the
terminal
⑥
is also used for the measure of 3W resistance.
⑥ ⑦
Source mA and Measure 4W
Ω terminals
Terminals for sourcing current, or for measuring resistance
of 4W.