6
3.
Then the type of product and automatic shutdown time will be displayed for 2
seconds as shown in Figure 2.1-3.
Figure 2.1-3
4.
Then the default interface of boot will be displayed as shown in Figure 2.1-4:
Figure 2.1-4
Attention: The upper and lower default modes are both based on DC voltage during turn on.
5.
Press
for SOURCE mode (lower screen). The screen will display as
shown in Figure 2.1-5.
Figure 2.1-5
6.
Press
or
to increase or decrease 1 of the
number
that locates at the line
(the number automatic carry but the position of the line have no change). Press
or
to select a digit to change.
7.
Press
to select 1 V for the output value, and then press and hold
until the buzzer work to enter 1V as the 0% value.
8.
Press
to select 5 V for the output value, and then press and hold
until the buzzer work to enter 5V as the 100% value.
9.
Press
and
to step between 0 and 100% in 25% step increments.
