![background image](http://html1.mh-extra.com/html/east-tester/et2725a/et2725a_user-manual_3446894021.webp)
18
Figure 5.1-1
Attention : If the calibrator and the thermocouple plug are at different temperatures, wait one minute or
more for the connector temperature to stabilize after you plug the miniplug into the TC input/output.
2.
Press
to select
mode.
3.
Press
for the TC display. If desired, continue pressing this key to select
the desired thermocouple type as shown in Figure 5.1-2.
Figure 5.1-2
4.
Press
to display the DC mV value reading as shown in Figure 5.1-3. The
DC mV value continue to display for 3s and then automatically return to the
original display.
Figure 5.1-3
There are two kinds of cold end temperature compensation for thermocouple
TC