Page: 6
p
1. Lightly sand all of the foam parts edges
before assembly.
p
2. Locate the left & right wing panels and
use a piece of wax paper underneath to
catch any excess glue.
p
3. Apply a bead of foam safe glue down the
mating side of the wing panels.
p
4. Pull them together, aligning the the
pre-cut wing spar groove, and spray with
foam safe accelerator.
p
5. Locate and test fit the Carbon Fiber
Wing
Spar into the wing.
p
6. Run a bead of foam safe glue down the
length of the groove press in the spar & spray
with foam safe accelerator.
