Page: 21
p
81. Bend the gear out where it meets the
bottom of the fuse.
p
82. Lean the gear against the forward pegs
& wrap the rubber band around the pegs
for tension.
p
83. Install the wheels with wheel collars
and the landing gear is complete.
p
84. With the carbon fiber trussing
reinforcements, cut a piece for each wing
panel that begins at the leading edge side
of the fuse and attaches near the trailing
edge of each wing tip as shown.
p
85. Reinforce the tail section on each side
with the remaining carbon fiber trussing as
shown.
p
86. With the motors mounting plate as a
guide mark all holes necessary for mounting
your chosen motor to the firewall.
