To re-insert the cam, first position the front of the
cam in the front locator.
The rear cam housing has a slotted guide. Gently
push the cam down on this guide; you may also
need to slowly turn the cam arm anti clockwise until
it clicks into position and is completely horizontal.
Re-site the motor unit with the black electrical
connection to the right (when viewing from front to
back).
This is how the motor should look.
If it is difficult to turn when in position, try to put the
motor in the correct position before inserting.
Once fully pushed in, turn the motor to the left
when viewing from left to right.
Replace the white plastic pin into the hole on the
housing (next to the two holes on the lug of the
motor unit).
15
Troubleshooting Guide (continued)
