East Coast Datacom Nx8- Dual Composite MUX High-Speed 16-Port TDM Multiplexer, Operation Manual

Page: 63 / 77

166119
8/31/2006 59
5 Appendix
5.1 Factory Default Configuration (Null Configuration)
Systems are shipped with a factory-default configuration to provide a starting point for the
operator to configure the system and establish limited, basic functionality of the hardware.
The factory default configuration may be restored in working configuration memory at any
time by executing the Null
Configuration Reset command.
Table 14 summarizes the settings stored in systems upon shipping to the customer.
Composite Port All Channels / Ports (1-16)
State
Disable De-allocated
Rate 768Kbps 0 (No Clock)
Port Type Off RS-232 Async, 10bits
Loops None None
Timing Source RxC (f/DCE) N/A
TxD Clock TxC TxC
DCD Source N/A Follow Sync
TxCE Output
Disabled N/A
Password “default”
Table 14 – Nx8-DualMUX Factory Default (Null) Configuration Settings