East Coast Datacom Nx8- Dual Composite MUX High-Speed 16-Port TDM Multiplexer, Operation Manual

Page: 58 / 77

166119
8/31/2006 54
4.7.4.9 Reset to Null Configuration
Selecting this option causes the current active local configuration to the reset to a “null”
configuration. The following image of the configuration status display (Figure 25) indicates the
state of the local system in a null configuration:
~ Nx8 ID: xxxxx Sys:3.2 FPGA:3.2 Ser:0 00007:34:32
~- CpA=o CpB=o Channels: X X X X X X X X X X X X X X X X LPwr=+x RPwr=..
-----------------------------------------------------------------------------
LOCAL NEAR FAR TX RX
CHANNEL STATUS SPEED ATTRIBUTES LOOPS LOOPS DATA DATA
Comp A Off 64 Kbps 62.4K unused, HI-Z None None n/a n/a
Comp B Off 64 Kbps 62.4K unused, HI-Z None None n/a n/a
CH 1 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 2 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 3 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 4 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 5 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 6 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 7 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 8 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 9 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 10 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 11 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 12 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 13 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 14 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 15 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
CH 16 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----
<ESC> to exit, <Enter> to refresh: [FLASH NOT UPDATED]
Figure 25