9
4
Before closing the front cover, it is possible but
optional to lock the Chargeberry with a padlock (see
recommended padlock size on page 13). Locking the
electronics adds an extra level of security (padlock is not
included).
4
Front cover
Closing
3
1
2
4
”CLICK!”
3
1.
Hang the front cover at the top of the backplate and
let it fall into place.
2.
Press the bottom of the front cover until you hear a
click.
3.
Bend the lower part of the rubber cover down.
4.
Screw in the locking screw at the bottom of the
charger to secure the front cover.
5.
Close the rubber cover. If the cable is inserted from
the bottom, you can cut a corresponding hole in the
rubber cover to ensure a neat installation.
Your Charging Robot is now ready for use!