EN - 66
V.
2
After defrosting is complete, clean
the inside of the appliance with a
solution of warm water and a little
bicarbonate of soda, then dry
thoroughly. Wash all removable
parts in the same way and re-
assemble. Reconnect the appliance
to the mains supply and leave for 2
to 3 hours on setting number MAX
before introducing the food back
into the freezer.
Replacing LED Lighting
To replace any of the LEDs, please
contact the nearest Authorised Ser-
vice Centre.
Note: The numbers and location
of the LED strips may change
according to the model.
If product equipped with LED lamp
This product contains a light source
of energy efficiency class <E>.
If product equipped with LED Strip(s)
or LED card(s)
This product contains a light source
of energy efficiency class <F>.
6. SHIPMENT AND REPOSI-
TIONING
6.1 Transportation and Changing
Positioning
The original packaging and foam
may be kept for re-transportation
(optional).
Fasten your appliance with thick
packaging, bands or strong cords
and follow the instructions for
transportation on the packaging.
Remove all movable parts or fix
them into the appliance against
shocks using bands when reposi-
tioning or transporting.
Always carry your appliance
in the upright position.
6.2 Repositioning the Door
•
It is not possible to change the ope-
ning direction of your appliance
door if door handles are installed on
the front surface of the appliance
door.
•
It is possible to change the opening
direction of the door on models
with handel on the side of the door
or without handles.
•
If the door-opening direction of
your appliance can be changed,
contact the nearest Authorised
Service Centre to change the
opening direction.
