69
Figure 8
Illustration of feet adjustment
NOTE:
The maximum adjustment height
of the feet is 50 mm.
ABOUT ELECTRICITY CONNECTING
WARNING!
For personal safety:
Do not use an extension cord or an adapter plug with this appliance.
Do not, under any circumstances, cut or remove the earthing.
Connection from the power cord.
ELECTRICAL REQUIREMENTS
Please look at the rating label to know the rating voltage and connect the
dishwasher to the appropriate power supply. Use the required fuse 10 amp,
time delay fuse or circuit breaker recommended and provide separate circuit
serving only this appliance.
ELECTRICAL CONNECTION
Ensure the voltage and frequency of the power being corresponds to those on
the rating plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug, replace the socket, rather than using an adaptor or the
like as they could cause overheating and burns.
COLD WATER CONNECTION
Connect the cold-water supply hose to a threaded ¾ (inch)
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an
extended period, let the water run to make sure that the water is
clear. This precaution is needed to avoid the risk of the water
inlet to be blocked and damage the appliance.
¡WARNING!
V.1
