62
NOTE: When following this procedure from step 1 to step 2, the filter system will
be removed.
When following it from step 2 to step 1, the filter system will be installed.
REMARKS
-
Inspect the filters for blocking after every time the dishwasher has been
used.
-
By unscrewing the coarse filter, you can remove the filter system.
Remove any food remnants and clean the filters under running water.
NOTE
The entire filter assembly should be cleaned once a week.
CLEANING THE FILTER
To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble
the filter parts as shown in the figures on the last page and reinsert the entire
assembly in the dishwasher, positioning it in its seat and pressing downwards.
WARNING: When cleaning the filters, don’t knock on them. Otherwise, the filters
could be contorted and the performance of the dishwasher could be decreased.
7.2 Caring for the dishwasher
The control panel can be cleaned by using a lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.
For the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any parts of the
dishwasher.
CLEANING THE DOOR
WARNING
Never use a spray cleaner to clean the door panel as it may damage the
door lock and electrical components.
Abrasive agents or some paper towels should not be used because of the
risk of scratching or leaving spots on the stainless-steel surface.
To clean the edge around the door, you should use only a
soft warm, damp cloth.
To avoid penetration of water into the door lock and
electrical components, do not use a spray cleaner of any
kid.
V.1
