66
8.3
Tension adjustment of the door spring
The door springs are set at the factory to the proper tension for the outer door.
If aesthetic wooden panel are installed,
you must adjust the door spring tension.
Rotate the adjusting screw to drive the
adjustor to strain or relax the steel cable
(see figure 5).
Door spring tension is correct when the
door remains horizontal in the fully
opened position, yet rises to a close with
the slight lift of a finger.
Figure5
Tension adjustment
of the door spring
CONECTION OF DRAIN HOSES
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let
it run into the sink, making sure to avoid bending or crimping it. The top of the
hose must be less than 1000mm.
V.1
