EN - 69
The doors are not opening or closing
properly
Check if:
•
There is food or packaging preventing the
door from closing
•
The door compartments, shelves and
drawers are placed properly
•
The door gaskets are broken or torn
•
Your fridge is level.
The edges of the fridge in contact with
the door joint are warm
Especially during summer (warm weather),
the surfaces in contact with the door joint
may become warmer during operation of
the compressor. This is normal.
Recommendations
To stop the appliance completely, unplug
from main socket (for cleaning and when
the door is left open).
8 TIPS FOR SAVING ENERGY
1. Install the appliance in a cool, well-
ventilated room, but not in direct sunlight
and not near a heat source (such as a
radiator or oven) otherwise an insulating
plate should be used.
2. Allow warm food and drinks to cool
before placing them inside the appliance.
3. Place thawing food in the refrigerator
compartment. The low temperature
of the frozen food will help cool the
refrigerator compartment while the food
is thawing. This will save energy. Frozen
food left to thaw outside of the appliance
will result in a waste of energy.
4. Drinks or other liquids should be
covered when inside the appliance. If
left uncovered, the humidity inside the
appliance will increase, therefore the
appliance uses more energy. Keeping
drinks and other liquids covered helps
preserve their smell and taste.
5. Avoid keeping the doors open for long
periods and opening the doors too
frequently as warm air will enter the
appliance and cause the compressor to
switch on unnecessarily often.
6. Keep the covers of the different
temperature compartments (such as the
crisper and chiller) closed.
7. The door gasket must be clean and
pliable. In case of wear, replace the
gasket.
Summary of Contents for EMC177ABI
Page 119: ...FR 119 ...
Page 120: ...52317217 ...
