EAS Electric EBP08WZRN, Instruction Manual

Page: 60 / 89

6.3.2 Set Temperature
When heat pump is on, short-press or into water temperature setting surface. Water
in area temperature value twinkles, press or to select value, press to confirm
and exit current setting. No any set up after 30 seconds, the controller will save the last setting
and go back to original surface.
6.3.3 Set Parameter
When heat pump is on, Long-press into menu, displays Parameter Query, press
or select among Parameter Query/Parameter Setting/Debugging Status/History Fault.
Short-press to confirm your selection and switch to , press or to select,
display two“88”, it is asking you to
and
to select,
press
to confirm. When password is
displays the value.
When on status of Parameter Setting,
enter your password, press and
right, displays Parameter No.
displays related parameter value.
When on status of Debugging, displays the Number, 01 water pump debugging, 02
displays ON or Off. The related mode symbol twinkles after entering
testing mode, and
into testing mode.
6.3.4 Display on each status:
Error Query
When Heat Pump is off, Dial 4 switches to 1, give the heat pump power into status of function
diagnosis automatically. Then display will show each symbol and change every 1 second.
Parameter Query
Parameter Setting
Debugging Status
Note: Value twinkles, means it is available for changing, or in verse
6.4 Function Diagnosis
V.1 15