1.
Fitting telescopic tube to the body
Insert the telescopic tube into the hole on the body. Secure it with the nut and screw (Fig. 1)
Fig. 1
2. Assembling the handle
Assemble handle to the telescopic tube. Make sure the 2 holes on the handle match the 2 holes on the telescopic tube (Fig.2), secure
handle to the telescopic tube with 2 screws and nuts. (Fig.3)
Fig. 2
Fig. 3
3. Assembling the extension misting wand
Twist the nozzle counterclockwise to remove from spray gun (Fig. 4). Twist the extension wand Clockwise to install on spray gun
(Fig. 5).
Fig. 4
Fig. 5
Assembling
To prevent the risk of fire, do not operate the battery charger on a flammable surface (e.g. paper, textiles, etc.) or in combustible
environments.
If the Roll & Spray garden sprayer gun is dropped, or subjected to a hard impact, liquid can be ejected from the battery. Should this
liquid accidentally contact your skin, immediately flush the area with water as it can cause irritation and even burns. Should the liquid
contact your eyes you will also need to seek medical attention.
To prevent the risk of short circuit, do not open the battery yourself.
To prevent the risk of explosion, protect the battery from heat, such as continuous sunlight or fire.
To prevent the risk of explosion, do not short-circuit the battery.
If the battery becomes damaged due to improper use, vapor may be emitted. Should this happen get fresh air and consult a doctor
should any respiratory complaint develop.
SAFETY PRECAUTIONS
5
