4.
Install spray gun assembly to the tank.
Insert the suction tube into the tank. Screw the cap on securely. (Fig. 6)
Place the spray gun into the holster. (Fig. 7), tighten the strap (Fig. 8)
Fig. 6
Fig. 7
Fig. 8
5.
Fit nozzle to the telescopic tube.
Two different nozzles are supplied with your Roll & Spray. To avoid unused nozzle from getting lost, we recommend attaching the
unused nozzle to the telescopic tube when the wand is on spray gun.
A. Screw the nozzle clockwise (Fig. 9) onto the telescopic tube
B. Fit wand nozzle to telescopic tube (Fig. 10) when not in use
.
Fig. 9 Fig. 10
1. Starting:
Push the safety lock (i) down and squeeze the trigger (d) on the spray gun.
2. Stopping:
Release the trigger (d). Push the safety lock (i) up in the lock position when not in use.
3. Adjust nozzle:
Twist the nozzle to get stream or spray functions.
Operation
Assembly
6