Call us first with questions about operating or maintaining your product
at 1.800.313.5111 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,
or or get assistance on www.americanlawnmower.com.
If you drop the trimmer, carefully inspect it for damage. If the blade
is bent or cracked, handles broken or if you see any other condition
that may affect the trimmer’s operation, it must be repaired before
putting it back into use. Call our customer service help line at
1-800-313-5111 for assistance.
CAUTION:
Do not at any time let brake fluids, gasoline, petroleum
based products, penetrating oils, etc., come in contact with plastic
parts. They contain chemicals that can damage, weaken or destroy
plastic.
Make sure the battery is detached from the unit, then use only mild
soap and a damp cloth to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT
: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by a
qualified individual using only identical replacement parts.
The cutting blades are made from high quality, hardened steel and
with normal usage, they will not require re-sharpening. However, if
you accidentally hit a wire fence, stones, glass or other hard objects,
you may put a nick in the blade. There is no need to remove this
nick as long as it doesn’t interfere with the movement of the blade.
If it does interfere, make sure the battery is detached from the unit
and use a fine toothed file or sharpening stone to remove the nick.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the tool
on or adjacent to fertilizers or chemicals.
LUBRICATE BLADES - Stop the unit
and remove the battery pack. Then
remove any debris on blades. Apply a
light machine oil along the edge of the
top and bottom blade supports. Make
sure handles remain clean and dry.
TROUBLESHOOTING
CALL US FIRST !!
MAINTENANCE
8
Problem Possible
Cause
Possible
Solution
Unit does not run
Battery not making contact
Check battery is fully inserted
Trigger switch not operational
Check that lock off button is fully depressed before moving
trigger
Battery not installed properly
Check battery installation
Battery not charged
Check battery charging requirements
Slow running, noisy or hot blades
Dry, corroded blades
Lubricate blades
Blades or blade support bent
Straighten blade or blade support
Bent or damaged teeth
Straighten teeth
Loose blade bolts
Tighten blade bolts
Battery will not charge
Battery not inserted into charger
Insert battery into charger until red LED appears
Charger not plugged in
Plug charger into a working outlet
Check current at receptacle by plugging in a lamp or other
appliance
Check to see if receptacle is connected to a light switch which
turns power off when you turn out the lights.
Surrounding air temperature too
hot or too cold
Move charger and tool to a surrounding air temperature of about
39° F (4° C) or below 104° F (+40°C)
Model
LPHT12022
For parts or service, please call 1-800-313-5111 or visit us online at www.americanlawnmower.com. Be
sure to provide all relevant information when you call or visit.
REPAIR PARTS (KITS/ ITEMS)
The model number of this tool is found on a plate or label attached to the housing. Please record the serial
number in the space provided below.
MODEL NUMBER LPHT12022___
SERIAL NUMBER_______________
No.
Kit/Item Number
Description
1
LPHT20-HDW-1
Hardware kit
2
LPHT20-PAK-1
Pole kit
No.
3
4
Kit/Item Number
BL82120
CHL82000
Description
Battery Pack
Charger
Always mention the model number when ordering kits/items for this tool.
