ATTACHING THE SHOULDER STRAP
Attach the shoulder strap to the strap bracket. Use the
shoulder strap to help support the trimmer while in use.
PIVOTING THE POWER HEAD
The Pole Hedge Trimmer is equipped with a power head
that pivots. The power head has a spring-loaded button that
allows it to be locked into six positions within its 150-degree
rotation. Before starting the Pole Trimmer, make sure the
power head is locked into position. Do this by trying to rotate
the power head in either direction. The power head should
be locked in position and should not rotate. To pivot the
power head, follow the instructions below.
1. Push the round button located on the side of the pivot
bracket. The button is spring-loaded, so you will feel
some resistance.
2. Grasp the power head motor housing and rotate the
power head to the preferred position.
3. Release the round button. It should snap back into its
seated position. If it does not, rotate the power head
back and forth slightly until the button snaps back into
its seated position. The power head is now locked into
position and ready for use.
Adjustable Angles
6 Positions—30º Increments
150º Cutting Rotation
UNPACKING
This product requires some assembly.
Carefully remove the product and any accessories from the box.
Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage
occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call 1-800-313-5111 for
assistance.
PACKING LIST
Pole Hedge Trimmer - Charger and Battery Pack - Blade Cover -
Shoulder Strap - Instruction Manual
WARNING:
Do not install battery until assembly is complete. Failure
to comply could result in accidental starting and possible serious
personal injury.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this warning
could result in serious personal injury.
TO ASSEMBLE THE POLE:
Push the pole into the head as shown.
Slide down the locking collar and turn clockwise to secure.
3
ASSEMBLY / OPERATING
90º
60º
30º
0º
30º
60º
