EarlySense InSight AME-01350-US, User Manual

Page: 31 / 37

Manufacturer declaration
30
Table 10: System Compliance Information – Enclosure Port Immunity to RF Wireless
communications equipment
Test Frequency
(MHz)
Band
a
(MHz)
Service
a
Modulation
b
Maximum
power (W)
Distance(m)
Immunity
Level
(V/m)
Compliance
Level
(V/m)
385 380 – 390 TETRA 400
Pulse
modulation b)
18 Hz
1,8 0,3 27
27
450 430 – 470
GMRS 460,
FRS 460
FM c)
± 5 kHz deviation
1 kHz sine
2 0,3 28 28
710
704 – 787
LTE Band 13, 17
Pulse modulation b)
217 Hz 0,2 0,3 9 9
745
780
810
800 – 960
GSM 800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse
modulation b)
18 Hz
2 0,3 28 28
870
930
1 720
1 700 –
1 990
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1,
3,
4, 25; UMTS
Pulse
modulation b)
217 Hz
2 0,3 28 28
1 845
1 970
2 450
2 400 –
2 570
Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450, LTE
Band 7
Pulse
modulation b)
217 Hz
2 0,3 28 28
5 240
5 100 –
5 800
WLAN 802.11
a/n
Pulse
modulation b)
217 Hz
0,2 0,3 9
9
5 500
5 785
NOTE If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting antenna and the
ME EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test distance is permitted by IEC 61000-4-3.
a) For some services, only the uplink frequencies are included.
b) The carrier shall be modulated using a 50 % duty cycle square wave signal.
c) As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not represent actual modulation,
it would be worst case.