Earlex SS77USSG, Operating Manual

Page: 8 / 12

EN
8
SS77USSG
correction of Malfunctions
Malfunction cause remedy
The steam
generator is not
working
•
Adapter blocked
•
Heating element covered in
limescale
•
Too little water in tank. A safety
cut out is fitted to prevent
overheating of element if there is
little water in tank
•
Unit at an angle, heating element
is not in water
➞
Clean
➞
Clean
➞
Fill with more water.
Wait 2 minutes. Refill
will reset the cut-out
element
➞
Move unit into
horizontal position
accessories
further information about the EarlEX range of products for decorative
preparation is available on www.earlex.com.
Environmental protection
The tool and all accessories and packaging have to be recycled in
an environmentally friendly manner. Do not dispose of the tool with
household waste. Support environmental protection by taking the tool
to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents must not be emptied into drains, the sewage
system or disposed of as household rubbish. It has to be disposed
of separately as special waste. Please pay special attention to the
instructions on the product packaging.
important note regarding product liability!
In accordance with an EC directive, the manufacturer is liable for his product
only if all parts originate from or were approved by the manufacturer and the
tools are assembled and operated correctly. The use of other accessories and
spare parts can partially or completely invalidate the liability.