Earlex SS77USSG, Operating Manual

Page: 4 / 12

EN
4
SS77USSG
d) the tool plug must fit into the socket-outlet. the plug may not
be modified in any form. Do not use adaptor plugs together with
grounded tools.
Unmodified plugs and suitable sockets reduce the risk of
an electric shock.
e) avoid physical contact with grounded surfaces such as pipes,
heating elements, stoves and refrigerators.
The risk through electric
shock increases if your body is grounded.
Safety instructions for Steam Generator
attention!
When working with hot steam (min.212°F), there
is a risk of serious scalding. Hot steam and boiling water can emit
when the safety valve (4 A) is activated due to overpressure in
incorrect operation of the unit.
Only change position during use, with care. The steam unit, hose
and accessories can be very hot. Always wear suitable protective
clothing / gloves.
Operate the unit only with pure water without agents or additives.
Do not switch the unit on when empty.
this device is not to be used for space heating purposes.
Never point the hose adapter / accessories at people, animals or at objects
sensitive to temperature. always ensure that the unit is standing securely
in a horizontal position (on the floor) (fig. 5).
Do not stand on or place objects onto the unit or steam hose. Never over-twist
or make kinks in the steam hose, and never block the valve. Only carry the unit
by its handle. Never pull on the steam hose or supply cord.
Never submerge the unit in liquid. Every time the accessory is changed for
filling / refilling and emptying or when the steam unit is not in use (including
work pauses), pull the mains plug out of the socket-outlet. Never overfill the
unit. Unplug the mains plug in the event of overfilling or a fault.
Use only EARLEX original spare parts and accessories!
Caution! Danger of short-circuits! Cover socket-outlets and
switches and do not subject them to steam.
Use only a 3-wire extension cord that has a 3-blade grounding
plug, and a 3-slot receptacle that will accept the plug on a
product. Make sure your extension cord is in good condition and
of a heavy gauge to carry the maximum current as shown below:
16 AWG for leads up to 25' in length.
12 AWG for leads up to 50' in length.
10 AWG for leads up to 100' in length.
Ensure extension lead is protected at the mains source by a 15A
rated circuit-breaker in accordance with UL489.
The unit switches off automatically in case of overheating. After approx.10
minutes, the unit switches itself back on automatically.
The steam time is approximately 90 minutes. Never leave a unit unattended if
switch is on. Keep the unit away from children and animals. Don't boil dry.