background image

PLEASE NOTE: We have done all we can to ensure that when used correctly and in accordance with these instructions the spray gun has a

long and fault-free life. We accept no responsibility for damage caused by the use of incorrect or unsuitable substances, paints or liquids

which have not been thinned correctly or which are not suitable for the surfaces to which they are applied, health hazards arising from a

lack of ventilation when working in confined spaces or equipment which is faulty due to inadequate cleaning of the components after use. If

in doubt, test a small inconspicuous area first. Always read the manufacturer’s instructions before use. Neither our guarantee nor the above

statement affects your statutory rights.

MAINS CONNECTION

Your spray station has been supplied with a mains lead which is fitted with a plug.

• If the plug is cut off from the mains lead, it must be disposed of safely. NEVER under any circumstances insert a plug which is cut off from the mains

lead into socket.

If you are using an extension lead, it must be rated at a minimum of 5 amps and must be fully unwound.

ENVIRONMENTAL INFORMATION

Please do not dispose of tools with your household waste collected by the council.

We would remind you that all councils have now implemented a selective waste collection scheme. These schemes contribute to

recycling, reuse and other forms of recovery of these tools. Sorting waste reduces the potentially harmful effects on the environment

and public health caused by dangerous substances which may be contained in certain electrical and electronic products. The symbol

above indicates that electrical and electronic goods are collected and sorted under such schemes.

All rights reserved © 2008

EC Declaration of Conformit

y

We hereby declare that the HV4900 spray station conforms to LVD standards,

2006/95/EC, EN 60335-1, EMC 2004/108/EC, EN55014-1, EN55014-2,

EN61000-3-2 and EN61000-3-3.

Tim Hopper Technical Director

Design Registration: GB 2106529, DE 402 04 314.6,FR 02 3314, US 29/161, 395

GUARANTEE and HELPLINE

This product is guaranteed for a period of 24 months against faulty manufacture or materials. It is not guaranteed for indus-

trial or hire purposes. This guarantee does not affect your statutory rights. For further information or any user

advice, please phone our helpline between 9 am and 5 pm Mondays to Fridays (excluding Bank Holidays),

or visit our website www.earlex.fr

Earlex (Limited liability company), Tel: + 33 (0)4 76 67 18 46

E-mail: [email protected]

EARLEX LTD. WILL ACCEPT NO RESPONSIBILITY FOR THE USE OF THIS PRODUCT IF USED FOR ANY OTHER

PURPOSES THAN THOSE DETAILED HEREIN.

9

Summary of Contents for HV4900










Reviews: