US
12
HV4500
21. Important Note regarding Product Liability!
The manufacturer is liable for this product only if all parts originate from or were approved
by the manufacturer and the tools are assembled and operated correctly. The use of other
accessories and spare parts can partially or completely invalidate the liability.
22. Correction of Malfunctions
Malfunction
Cause
Remedy
No coating
material emerges
from the nozzle
•
Nozzle clogged
•
Material volume setting too low
•
No pressure build-up in container
•
Container empty
•
Feed tube loose
•
Feed tube clogged
➞
Clean
➞
Alter material volume
adjuster
➞
Tighten container
➞
Refill
➞
Insert
➞
Clean
Coating material
drips from the
nozzle
•
Coating material clogged at air cap,
nozzle or needle
•
Nozzle loose
•
Nozzle seal worn
•
Nozzle worn
➞
Clean
➞
Tighten air cap ring
➞
Change
➞
Change
Atomization too
coarse
•
Material volume too high
•
Nozzle contaminated
•
Viscosity of coating material too
high
•
Too little pressure build-up in
container
•
Air filter heavily soiled
•
Amount of air too low
➞
Alter material volume
adjuster
➞
Clean
➞
Dilute further
➞
Tighten container
➞
Change
➞
Alter material volume
adjuster
Spray jet pulsates
•
Coating material in container
running out
•
Nozzle seal worn
•
Air filter heavily soiled
➞
Refill
➞
Replace
➞
Replace
Coating material
causes "paint
tears"
•
Too much coating material applied,
material volume setting too high
➞
Alter material volume
adjuster
Summary of Contents for HV4500
