background image

US

15

HV4500

2 year warranty

The warranty runs for two years, counting from the date of sale (sales slip). It covers 

and is restricted to free-of-charge rectification of faults which are demonstrably 

attributable to the use of faulty materials in manufacture, or assembly errors; or free-

of-charge replacement of the defective parts. The warranty does not cover incorrect 

use or commissioning or fitting or repair work which is not stated in our operating 

instructions. Wearing parts are also excluded from the warranty. The warranty 

excludes commercial use. We expressly reserve the right to fulfil the warranty. The 

warranty expires if the tool is opened up by persons other than manufacturer service 

personnel. Transport damage, maintenance work and loss and damage due to faulty 

maintenance work are not covered by the warranty. Under any warranty claim, there 

must be proof of purchase of the tool through submission of the original receipt. 

Wherever legally possible, we exclude all liability for injury, damage or consequential 

loss, especially if the tool has been used for a purpose other than that stated in the 

operating instructions, commissioned or repaired other than in accordance with our 

operating instructions or if repairs are performed by someone who is unqualified. 

We reserve the right to perform any repairs in excess of those stated in our operating 

instructions. In case of warranty or repair, please refer to your point of sale. This 

warranty does not affect your statutory rights.

Summary of Contents for HV4500























Reviews: