manualshive.com logo in svg

Eargo Max, User Manual

Share
Download
Eargo Max User Manual Download Page 31

26

Inserting & 

Removing 

Your Eargo Devices

To remove the Eargo device, 

grasp the removal thread and gently pull

*

. 

We know the devices are quite 

comfortable. We’re the ones who made 

them that way. Many people tell us they 

forget they even have them in. But please 

don’t forget to take them out. Got to let 

those babies breathe and recharge 

every now and then.

Eargo devices are designed for all day use, 

but not all night. Please remove them before 

sleeping and especially before showering. 

After removal, it’s a good idea to inspect 

your devices for wax build up, or to replace 

the Flexi Fibers or wax guards if needed. 

You can read more about this in the Eargo 

Care section (page 47).

*

CAUTION: 

In rare cases, the Flexi Fiber could remain in your ear when removing

the Eargo device. If this happens or you cannot locate the Flexi Fiber, have a 

healthcare professional remove it or verify it is not still in your ear.

Summary of Contents for Max































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands