Page 6
3. Safety Instruction
3.1 (A). Preparation:
To achieve ultimate performance of this on-Line UPS, Please observe the
Following.
1. Read the User’s Manual.
2. Follow the Operating Instructions closely.
3. Be gentle and careful when moving the unit around.
4. Plug into the correct power source.
5. Never open the cabinet to avoid electric shock and damaging to the unit.
6. Do not apply load which is exceeds the rated capacity, Otherwise damage
may occur.
7. Keep the User’s manual handy for quick reference.
8. Refer the trouble shooting guide when having problems.
9. Keep the unit clean all time.
3.1. (B). System setup:
1. Precaution
1. Remove all the wires.
2. Handle the unit very carefully and avoid dropping.
3. Never leave the unit upside down.
3.2. Installation
Refer to the following Instructions for system install:
Input:
a. Never plug the unit into a wall outlet. The standard 15A wall outlet
will not support the heavy load of the unit.
b. It is safe to connect the unit to the nearest utility panel.
c. Refer Fig for terminal block connections. The input power should be
connect to the right terminals. Note also that UPS output and
external batteries also share the same terminal block.
d. Use high quality power wires.
Renata I - Series User Manual