background image

EAGTAC

High Performance Tactical Flashlight

http://www.eagletac.com

TX25C2

User Manual

EAGTAC TX25C2 offers maximum output 
performance, versatile user interface, 
tough build quality and rich accessories 
like no other flashlight offers. This series 
is designed for police, professionals, and 
hobbyists.

WARNING - 

Lithium and Li-ion batteries 

can explode or cause burns if disas-
sembled, shorted, or exposed to high 
temperature. Do not mix with used or 
other battery types or install backwards.

* Tested with 2xCR123A with energy saving feature enabled

Quick Specifications

LED
LED Lumen
ANSI Lumen
Runtime*
Output

/AUX level

Circuit
Batteries
w/ extension tube
Voltage

XM-L U2

1030

852

1 to 90+ hrs

3 / 7

C3300 ST

1x18650 / 2xCR123A

2x18650/3-4xCR123a

2.7V-12V

Lithium and Li-ion battery can explode 
or cause burns if disassembled, 
shorted, or exposed to high tempera-
ture. Do not mix new and used batter-
ies. Do not mix batteries with different 
brand, capacity, voltage, or install 
batteries backwards. When the output 
starts to dim (this implies battery is 
almost drained), replace the batteries. 
Do not drain the batteries completely 
especially when you’re using two (or 
more) batteries in series.

All EAGTAC flashlights are designed to 
use “button-top” battery (battery with 
protruding positive terminal). For 
rechargeable li-ion battery, use only 
EagleTac li-ion battery, or other 
protected li-ion battery with compat-
ible length and diameter. Before using 
the battery, check and ensure the 
battery outer wrapping (the isolating 
plastic film that wraps around the 
metal housing of the battery) is com-
plete. Broken battery wrapping may 
lead to short circuit and damage to the 
flashlight.

Battery Safety Precaution

On/Off

Switch

Brightness

Adjustment

Tailcap

Quick Start Guide

1) Unscrew the tailcap and insert new 
batteries (w/ protrude top) to use. 
Ensure positive terminals is facing the 
LED and the ring that holds the pocket 
clip is tighten. Replace tailcap and 
tighten snugly.

Basic ON and OFF
Turn on the light by 

press and release

 

the on/off button switch (<0.4s). To turn 
off the light, 

press and release

 the 

switch again.

For momentary on,

press and hold

the button switch
for immediate
output.

LED (Front)

Tail-cap

Use it to prevent battery rattling.

CR123A battery magazine

pocket clip ring

Reviews: