Eagle KEE E15 Page 33 Operator'S Manual Download | Manualshive

Page: 33 / 108

background image

E15h SPRAYER- Sprayer Setup Operation

3.20 ENABLE PUMP SPEED SENSOR

Note: Select ON if a PUMP SPEED SENSOR is fitted to the sprayer loom, to the
plug marked PUMP SPEED. The PUMP SPEED plug is only available on the ‘FULLY
FEATURED HORTICULTURAL LOOM’.
When enabled ON , the PUMP SPEED RPM can be displayed in the FLOW RATE
window.

• Press MENU
• Press ENTER to select SETUP
• Press ENTER to select SPRAYER SETUP
• Press the DEC button to advance to the SPRAYER SETUP 2 screen
• Press the DEC button to advance to the SPRAYER SETUP 3 screen
• Press LINE 1, to highlight PUMP SPEED SENSOR
• Press ENTER to edit the PUMP SPEED SENSOR.
• Press INC/DEC buttons, to enable the PUMP SPEED SENSOR ON or OFF
• Press ENTER to accept changes

3.21 ENABLE AUXILIARY SHAFT SENSOR

Note: Select ON if a AUXILIARY SHAFT SENSOR is fitted to the sprayer loom, to
the plug marked AUXILIARY SHAFT The AUXILIARY SHAFT plug is only available
on the ‘FULLY FEATURED HORTICULTURAL LOOM’.
When enabled ON , the AUXILIARY SHAFT RPM can be displayed in the FLOW
RATE window.

• Press MENU
• Press ENTER to select SETUP
• Press ENTER to select SPRAYER SETUP
• Press the DEC button to advance to the SPRAYER SETUP 2 screen
• Press the DEC button to advance to the SPRAYER SETUP 3 screen
• Press LINE 1, to highlight AUX. SHAFT SENSOR
• Press ENTER to edit the AUX.SHAFT SENSOR.
• Press INC/DEC buttons, to enable the AUX. SHAFT SENSOR ON or OFF
• Press ENTER to accept changes

3.22 ENABLE DUMP OVERRIDE

Note: Select ON to enable the DUMP OVERRIDE feature. This allows a Chemical
Induction Pump to suck premix chemical into the main tank. Don’t enable this
function unless your sprayer has been plumbed up correctly. When enabled ON ,
the DUMP OVERRIDE can be displayed in the VOLUME USED window.

• Press MENU
• Press ENTER to select SETUP
• Press ENTER to select SPRAYER SETUP
• Press the DEC button to advance to the SPRAYER SETUP 2 screen
• Press the DEC button to advance to the SPRAYER SETUP 3 screen
• Press LINE 2, to highlight DUMP OV’RIDE ENABLED
• Press ENTER to edit the DUMP OV’RIDE ENABLED.
• Press INC/DEC buttons, to enable the DUMP OV’RIDE ENABLED ON or OFF
• Press ENTER to accept changes

33

V 1.0 11/05

«
...
31
32
33
34
35
...
»

Summary of Contents for KEE E15













































































































Reviews:

No comments

Related manuals for KEE E15

Brand: Nady Audio Pages: 2

Brand: Plush Pages: 7

Brand: Omcan Pages: 12

Brand: Leprecon Pages: 23

Brand: Vermona Pages: 8

Brand: audiophony Pages: 24

Brand: Tesco Pages: 28

Brand: IMG STAGE LINEle Pages: 26

Brand: Pronomic Pages: 6

Brand: Doyon Pages: 32

Brand: DigiTech Pages: 27

Dito XBMF20AXT3

Brand: Electrolux Pages: 4

Brand: Electrolux Pages: 4

Dito XBMF20AST5

Brand: Electrolux Pages: 4

Brand: Electrolux Pages: 4

Brand: Russell Hobbs Pages: 8

Brand: Boston Acoustics Pages: 18

Brand: Panasonic Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands