Eagle EVR-150 Installation And Operation Instructions Manual Download

Page: 2 / 60

Eagle® is a registered trademark of Navico

No part of this manual may be copied, reproduced, republished, transmitted or

distributed for any purpose, without prior written consent of Eagle Electronics.

Any unauthorized commercial distribution of this manual is strictly

prohibited.

Eagle Electronics may find it necessary to change or end our policies,

regulations, and special offers at any time. We reserve the right to do so without

notice. All features and specifications subject to change without notice. All

screens in this manual are simulated. On the cover: EVR-150 shown. Other

models covered in the manual are similar.

For free owner’s manuals and the most current information on this product, its

operation and accessories, visit our web site: www.eaglesonar.com

Eagle Electronics

P.O. Box 669

Catoosa, OK USA 74015

Printed in China.

IMPORTANT SAFETY INFORMATION

Please read carefully before installation and use.

CAUTION

DANGER

WARNING

This is the safety alert symbol. It is used to alert you to potential personal
injury hazards, Obey all safety messages that follow this symbol to avoid-
possible injury or death.

CAUTION

DANGER

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury

CAUTION

DANGER

WARNING

CAUTION indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.

CAUTION

DANGER

WARNING

CAUTION used without the safety alert symbol indicates a potentially haz-
ardous situation which, if not avoided, may result in property damage.

Summary of Contents for EVR-150




























































Search results

Summary of Contents for EVR-150

Reviews:

Related manuals for EVR-150

Brands by name

Popular brands

Eagle EVR-150, Installation And Operation Instructions Manual

Search results

Summary of Contents for EVR-150

Reviews:

Related manuals for EVR-150

Brands by name

Popular brands