1.
➔
INSTALL
the
USB to Serial Cable
software
driver
on the Eagle Eye computer as instructed.
2.
➔
INSTALL
the
USB Extender
software
driver
on the Eagle Eye computer as instructed.
3.
➔
CONNECT Power
to the
Display Board
.
4.
➔
CONNECT
the
9-pin to 9-pin Serial Cable
to the
display board
and the other end to the
USB Serial Adaptor Cable.
5.
➔
CONNECT
the
USB to Serial Adaptor
to the
USB Extender
(with power).
6.
➔
CONNECT
the
USB Extender
to the
USB port
on the
Eagle Eye computer.
7.
➔
CONNECT
the long 300 foot
data cable
to
both USB Extenders
.
2. Optional Extended Range Set-Up
The distance from the display to the Eagle Eye computer can
be extended up to 300 feet with the use of additional data
cable and USB Extenders (pictured at right).
This additional cabling is necessary to position the timing
computer in the press box and the LED display on the finish
line.
USB EXTENDER ADAPTER OVER
NETWORK CABLE (300-FT)
Eagle Eye Computer
Software drivers installed
1. USB to Serial Cable Driver and
2 USB Extender Driver
Up to 300 Feet of
Data Cable
USB Extender
USB Extender
with Power
9-Pin to 9-Pin Serial Cable
USB to Serial
Adaptor
33
