MAIN MENU
40
2) MENU
Click “SETUP” to configure the connected zoom lens control camera.
Different zoom lens control cameras might have different parameter settings. For details, please refer to their
own user manuals.
Note:
While configuring the camera parameters, the DVR will switch to the corresponding channel, and
you can simultaneously preview the effects for the settings.
3) DEVICE
Here shows the model number of the camera.
4) CONNECTION
Here shows the examining result for DCCS signal transmission between the DVR and camera. The
message is as follows:
MESSAGE SHOWN
MEANING
CHECKING
The DVR is checking the DCCS signal transmission between the DVR and camera.
OK
The signal transmission is fine and the DCCS function works properly.
FAIL
The signal transmission is too weak or not available for the DCCS function to work properly.
5.4.9 IVS
Note:
This function is for selected models only.
Note:
Before using the IVS function, make sure the event record function is enabled on your DVR.
IVS, Intelligent Video Surveillance, is the advanced application for motion detection, but more precise and smarter.
It can be applied to different situations with one of the following three modes: FLOW COUNTING, VIRTUAL
FENCE, and ONE WAY.
When anyone crosses the detection line (virtual fence), the recording will be on.
Note:
Four camera channels are supported for this function.
ADVANCED CONFIG
CAMERA
IVS1
IVS2
IVS3 IVS4
DETECTION CAMERA
CH3
ALERT
IVS MODE
FLOW COUNTING
NETWORK DISPLAY
LINE
OFF
DISPLAY
SENSITIVITY
07
RECORD
RESET
COUNT
SUBMIT
DEVICES
VIRTUAL FENCE AREA
SETUP
DCCS
SCENE
CHANGE
OFF
IVS
SCENE CHANGE LEVEL
MIDDLE
NOTIFY
EXIT
1) CAMERA
Select the camera channel that you want to use the IVS function.
2) IVS
MODE
Select one of the following three modes depending on your environment:
MODE DESCRIPTION
FLOW COUNTING
A virtual detection line is set to detect the moving direction of pedestrians for flow counting.
VIRTUAL FENCE
A virtual detection line is set to detect intruders crossing the detection line, and an alarm will be
triggered.
ONE WAY
A virtual detection line is set to detect intruders from the specified direction, and an alarm will be
triggered.