MAIN MENU
38
7) COVERT
UNLOCK
IN SUPERVISOR MODE
Enable this function to allow the supervisor user to see live view even when the channel is set “COV.” to
“ON” in “ADVANCED CONFIG”
“CAMERA”.
5.4.6 RECORD
Note:
Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all HDD data, and start recording again.
ADVANCED CONFIG
CAMERA
MANUAL
RECORD
ON
DETECTION
EVENT
RECORD
ON
ALERT
TIMER
RECORD
ON
NETWORK
PRE-ALARM
RECORD
ON
DISPLAY
OVERWRITE
ON
RECORD
KEEP DATA LIMIT (DAYS)
OFF
DEVICES
RECORD
CONFIG
SETUP
DCCS
IVS
NOTIFY
EXIT
1) MANUAL
RECORD
Set the manual recording function on / off.
2) EVENT
RECORD
Set the event recording function on / off.
3) TIMER
RECORD
Set the timer recording function on / off.
4) PRE-ALARM
RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will record 8MB data before an
alarm / motion event is triggered.
5) OVERWRITE
Select “ON” to overwrite previous recorded data in your hard disk when the hard disk is full. When this
function is on and the hard disk is full, the DVR will clear 8GB data from the oldest for continuous recording
without notice.
6) KEEP DATA LIMITS (DAYS)
Assign the maximum recording days from 01 to 31 after which all the recorded data will be removed, or
select “OFF” to disable this function.
7) RECORD
CONFIG
Click “SETUP” to enter the setting page individually for manual record, event record and timer record.
For details, please refer to “5.1.1 GENERAL” at page 21.