This
document is the property of EADS TELECOM and should not be copied or circulated without permission
Ce document est la propriété de EADS TELECOM et ne peut être reproduit ou communiqué sans autorisation
1
MMI – PS10154AENAA01
I Level – G2 Handportable Maintenance Manual
1–1
Introduction
09/01/04
Page
1
INTRODUCTION
1.1
PURPOSE
This document is the I level (Intermediate level) maintenance manual for G2 Handportables.
The operation of the G2 Handportable and its individual subassemblies are described in the
G2 Terminal Technical Manual (see Section 1.3, Document <2>).
The terminal test benches are described in the TRB V2 Technical Manual (see Section 1.3,
Document <1>).
This document is divided into the following chapters:
•
Chapter 0
: Preliminaries
•
Chapter 1
: Introduction
This chapter provides general information including abbreviations, definitions, etc.
•
Chapter 2
: Description
This chapter provides a description of the hardware and operation of the G2
handportable, and gives a full list of essential tools required for I level maintenance.
•
Chapter 3
: Maintenance
This chapter describes the I level maintenance processes and the procedures for
replacing parts. It contains replacement sheets and photographs relating to the
dismantling and reassembly of the G2 handportable.
•
Chapter 4
: Notes
This chapter includes 4 blank pages for the operator to make notes.
•
Chapter 5
: Plates
This chapter contains the document plates.
This document is applicable beginning with the phase defined in Document <0>
(see Section 1.3).
