9
Do not touch non-insulated parts or cables, disconnect the machines
from voltage sources and guarantee no possible re-connection before
working on the machine.
Use measuring devices with a DC input voltage range of 600 V or
higher only.
High voltage is present in the live parts and cables inside the product
during operation, wait at least 5 minutes after disconnecting voltage
sources.
The temperature of some parts of the inverter may exceed 60
℃
during operation. To avoid being burnt, do not touch the inverter
during operation.
Pack inverters properly during transportation, and do not transport
them together with flammable material.
The battery compatible with the inverter shall be approved by the
inverter manufacturer. The compatible battery list can be obtained
through the official website.
Back-up function is not recommended if the PV Inverter is not
connected with batteries.
4. Mounting
4 Installation Location
The following points should be considered when selecting an installation
location.
The wall bearing inverters shall be able to hold the weight of at least 4
WARNING
Do not select locations storing flammable material which may cause fire
or explosion!