16
Using Computer Mode
This section explains how to use your
T
ARGET
drive as an external CD-
RW/CD-ROM drive for your PC.
Important!
These Instructions Must Be Followed Carefully!
Notes:
•
For Windows 98SE/98 operating systems, you must install
the bundled USB driver before connecting the D
ISC
C
LONE
II.
•
Only the T
ARGET
drive of this unit can work as an external
CD-RW/CD-ROM device for your computer.
•
Your computer must have a USB 2.0 port in order to use
this device as a writer or external drive at the maximum
speed. For Windows users, your PC must have a USB 2.0
host controller and a Windows USB Driver. USB 1.1 is also
supported, but not at the maximum burning speed.
C
ONNECTING
THE
D
ISC
C
LONE
II
TO
A
PC
A
B
*
1.
Turn on the
D
ISC
C
LONE
II
. In
approximately 25 seconds, the green
R
EADY
LED lights and a short beep
sounds to indicate that the
D
ISC
C
LONE
II
is ready for operation.
2.
To switch to Computer Mode, press
and hold the
T
URBO
button for 5 - 6
seconds until a tone sounds and all
three LEDs light up, then release the
T
URBO
button.
3.
Turn on your computer.
4.
Connect the end of the USB 2.0 cable
with the large connector to the
computer (
A
).
5.
Connect the end of the USB 2.0 cable
with the small connector to the
D
ISC
C
LONE
II
(
B
).
Chapter 3 – Connecting to a PC
Summary of Contents for DISCCLONE II
Page 31: ...24 Appendix A Product Information...
Page 38: ...22 69DC201305...