EV8AQ160TPY-DK
17
BDC- 1-Sep-10
e2v semiconductors SAS 2010
4 Software Tools
4.1. Overview
The Demo Kit board needs two different kinds of software tools:
•
FPGA software
The Demo Kit board can be plugged with XILINX VIRTEX 6 evaluation board EK-V6-ML605-G
http://www.xilinx.com/products/devkits/EK-V6-ML605-G.htm
e2v provides FPGA program to be used with QUAD 8bit Demo-Kit.
•
User interface software
The user interface software is a Visual C++ compiled graphical interface that does not require
a licence to run on a Windows NT and Windows 2000/98/XP PC.
The software uses intuitive push-buttons and pop-up menus to write data from the hardware.
Warning: For the software installation you need to have administrative rights.
4.2. Configuration
The advised configuration for Windows 2000/98/XP and Windows
NT is:
PC with Intel Pentium Microprocessor of over 100 MHz;
Memory of at least 24 Mo.
For other versions of Windows OS, use the recommended configuration from Microsoft.
