® 8k/4k CL
20
UM 8k/4k CL – REVA – 01/13
e2v semiconductors SAS 2013
•
Electronic board ID
(
ElectronicBoardID
) : Get PcB Board ID
Read function : “
r boid
”;
Returned by the camera : String of 32 bytes (including “/0”)
Can not be written
•
Device Temperature Selector
(
DeviceTemperatureSelector
) :
MainBoard
Can not be written
•
Device Temperature
(
DeviceTemperature
) : Get Main Board Temperature
Read function : “
r temp
”;
Return by the camera : Temperature in Q10.2 format (8 bits 2 bits below comma). Value is
between -512 to 511 in °C.
•
Device Serial Port Selection
: Indicates the Serial Port on which the Camera is connected.
•
Device Serial Port Baud Rate
(
ComBaudRate
): Set the Camera BaudRate
Read function : “
r baud
”;
Returned by the camera : Value of the Baud Rate
Write function : “
w baud
” <index> with the index as follows :
1 : 9600 Bauds (default value at power up)
2 : 19200Bauds
6 : 57600Bauds
12 : 115200Bauds
•
Standby Mode
(
Standby
) : Activation of the Standby mode of the Camera
Read function : “
r stby
”;
Returned by the camera : Boolean.
0 : Disable Standby mode (False)
1 : Enable stanby mode (True)
Write function : “
w stby <val>
”; <val> is 0 or 1.
A standby mode, what for ?
The Standby mode stops all activity on the
sensor level. The power dissipation drops
down to about
6W
. During the standby
mode,
the grab is stopped
Once the Standby mode turned off, the
Camera recovers in less than
1ms
to send
images again from the sensor.
Internal Temperature
25
30
35
40
45
50
55
60
65
70
75
0
5
7
10
20
30
40
50
60
70
80
90 10
0
11
0
12
0
13
0
14
0
Time (mn)
°C
Standby Off
Standby On
