e2v ELIIXA+ 16K CXP COLOR, User Manual

Page: 21 / 55

U
SER
M
ANUAL
16
K
/8
K
CXP C
OLOR
– R
EV
G – 09/2016 P
A G E
| 21
7 Camera Commands
7.1 Device Control
These are Identification values of the Camera. They can be accessed in the “Device Control” section
Feature CXP @ Size
(bytes)
R/W Description
DeviceVendorName 0x02000 32 RO Get camera vendor name as a string (including ‘\0’)
DeviceModelName 0x02020 32 RO Get camera model name as a string (including ‘\0’)
DeviceFirmwareVersion 0x02090 32 RO Get camera synthetic firmware version (PKG
version)
as a string (including ‘\0’)
DeviceVersion 0x02070 32 RO Get camera version as a string (hardware version)
(including ‘\0’)
DeviceManufacturerInfo 0x02040 48 RO Get camera ID as a string (including ‘\0’)
DeviceUserID 0x020C0 16 RW
Get device user identifier as a string (including '\0')
DeviceID 0x020B0 16 RO Read Serial Nb
ElectronicBoardID 0x08000 32 RO Read Electronic Board ID
ElectronicBoardTestStatus 0x08020 16 RO Read Electronic board status
DeviceSFNCVersionMajor Xml - -
DeviceSFNCVersionMinor Xml - -
DeviceSFNCVersionSubMinor Xml - -
DeviceTemperature 0x08E04 4 RO
Read Main board internal temperature (format signed
Q10.2 = signed 8 bits, plus 2 bits below comma. Value
from -512 to +511) in °C
DeviceTemperatureSelector Xml - - Device Temperature selector
Standby 0x08E08 4 RW 0 :Disable standby mode (“False”)
1 :Enable standby mode (“True”), no more video
available but save power and temperature
STATUS REGISTER
StatusWaitForTrigger 0x08E0C 4 RO
Bit 0: true if camera waits for a trigger during more than
1s
Status trigger too fast Bit 1: true if camera trigger is too fast
StatusSensorConnexion Bit 2: true if sensor pattern checking has failed
Status3V7 Bit 3: true if 3V7 failure
Status3V3 Bit 4: true if 3V3 failure
Status1V0 Bit 5: true if 1V0 failure
Status1V8 Bit 6: true if 1V8 failure
Status1V8ANA Bit 7: true if 1V8ANA failure
StatusWarningOverflow Bit 8: true if a an overflow occurs during FFC calibration
or Tap balance (available only for integrator/user mode)
StatusWarningUnderflow Bit 9: true if a an underflow occurs during FFC calibration
or Tap balance (available only for integrator/user mode)
Status2V5 Bit 10: true if 2V5 failure
CC3 Scrolling direction Bit 11: 0 : forward, 1: reverse
StatusErrorHardware Bit 16 : true if hardware error detected