E-XTEQ DS One, User Manual

Page: 33 / 40

33/40
E-XTEQ DS ONE User Manual / Ref. MAN_DSOne_STL_EN_V1.3
Other diagnostics
2/2
OTHER DIAGNOSTICS ////////
If the battery characteristics are
correct, click on
to go to the next
step.
A battery ID must be indicated
(minimum 2 characters). Enter the ID
using
or manually with
, then
click on
to validate.
MBM test are always performed on batteries outside the vehicles.
This screen will appear reminding to
connect to the battery terminals. Press
the
button to continue.
It will then be necessary to follow all
the steps describe on the section
“start diagnosis” of this manual, to
arrive on the result screen. Click on
to go to the next step.
The tool will then ask if another battery
should be tested. Click on
to
perform another test.
The tool will return to the BATT ID
screen. Fill it in, then continue, and so
on for the other battery diagnostics.
Click on to close the test series. The tool will display the job
synchronization dialogue (refer to the
start diagnostic section of this manual).
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Information internal battery
Getting Started
Safety Reminders
Appearance and Dimensions
Presentation
Job Storage
Accessories
Best Practices
Positioning of the clamps
Connector longevity
Hybrid vehicles
Initial Setup
Power Cable Connection and Power On
Battery Cable Clamps Connection
Optimus
- Optimus installation
- Using Optimus
Update
Garage code (RRDI)
Settings
Preferences
WI-FI Connection
Other settings
Diagnostic PDI and REPAIR
Battery selection
- Using BK code
- Using VIN
Start Diagnostic
Other diagnostics
Results
Results storage
Support Information
Warranty
Technical specifications