28/40
E-XTEQ
DS ONE
User Manual / Ref. MAN_DSOne_STL_EN_V1.3
Diagnostic PDI
6/9
START DIAGNOSTIC ////////
Once the characteristics of the battery are selected (either with the BK code or with
the VIN), the tool will ask if the battery is inside or outside the vehicle.
Select battery location, inside vehicle.
Or out of the vehicle battery location.
If you select out of the vehicle, a
battery ID must be entered. Minimum
2 characters must be filled in.
Enter the ID using or manually with
, then click on
to validate.
If a test is made using a BK code
containing a compensation value and
the battery is in the vehicle, or, this
screen will appear prompting the
user to consult the manual of clamp
connection positioning, if the vehicle
is not available in the database.
Then this screen stating a remote
connection will appear. Press
to continue.
Either a picture will show the
connection position of the clamps to
be respected. Press
to continue.
In all other cases this screen will
appear. Press to continue.
The previous step will allow to calculate the resistance
due to the location of the battery if applicable.
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Information internal battery
Safety Reminders
Appearance and Dimensions
Presentation
Job Storage
Accessories
Positioning of the clamps
Connector longevity
Hybrid vehicles
Power Cable Connection and Power On
Battery Cable Clamps Connection
Optimus
- Optimus installation
- Using Optimus
Update
Garage code (RRDI)
Preferences
WI-FI Connection
Other settings
Battery selection
- Using BK code
- Using VIN
Other diagnostics
Results
Results storage
Support Information
Warranty
Technical specifications
