E-TOP BR480n User Manual Download Page 64

Page: 64 / 100

Wireless Access Control Mode

“

Allowed Listed

” means only the MAC address listed on the allowed list can access to your

wireless network.

“Deny Listed

” means the listed MAC Address are not allowed to link to your wireless

network.

“

Disable

” for function disuse.

2. MAC

Address

Please input the allowed or denied MAC address, for example, 001122334455.

3. Comment

You may input the comments for the set MAC Address.

Apply Changes & Reset

Click on “Apply Change” to save the setting data. Or you may click on “Reset” to clear all the

input data.

Current Access Control List

In this list, all the MAC info you input will be displayed.

Delete Selected and Delete All

Click on “

Delete Selected

” to erase the selected MAC address. Click on “

Delete All

” to erase

all the entered MAC Address.

Summary of Contents for BR480n





































































































Search results

Summary of Contents for BR480n

Reviews:

Related manuals for BR480n

Brands by name

Popular brands

E-TOP BR480n, User Manual

Search results

Summary of Contents for BR480n

Reviews:

Related manuals for BR480n

Brands by name

Popular brands