E-TOP BR480n User Manual Download Page 6

Page: 6 / 100

FCC Caution

The device complies with Part 15 of the FCC rules. Operation is subject to the following

conditions:

This device may not cause harmful interference, and this device must accept any

interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation

exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 20 centimeters between the radiator

and your body.

This Transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user authority to operate the equipment.

Summary of Contents for BR480n





































































































Search results

Summary of Contents for BR480n

Reviews:

Related manuals for BR480n

Brands by name

Popular brands

E-TOP BR480n, User Manual

Search results

Summary of Contents for BR480n

Reviews:

Related manuals for BR480n

Brands by name

Popular brands