b
2
2
2
b
7-8
FRONT BRAKE / REAR BRAKE
CHAS
3. Measure
• brake shoe lining thickness
2XWRIVSHFLILFDWLRQĺUHSODFH
Measuring points
Replace the brake shoes as a set if either is
found to be worn to the wear limit.
CHECKING THE BRAKE DRUMS
The following procedure applies to each brake.
• brake drum inside diameter
2XWRIVSHFLILFDWLRQĺUHSODFH
Brake drum inside diameter
85.0 mm (3.35 in)
<Limit>: 86.0 mm (3.39 in)
a
a
Brake lining thickness
3.0 mm (0.12 in)
<Limit>: 1.5 mm (0.06 in)
1. Check
INSTALLING THE FRONT AND THE REAR
Reverse the “Removal” procedure.
Note the following points.
1. Lubricate
• brake camshaft
• pivot pin
BRAKES
During installation, lightly grease the brake
camshaft and the pivot pin. Wipe off the excess
grease.
Lithium-soap-based grease
TIP
NOTICE
