5-6
TROUBLESHOOTING
If the troubleshooting still can’t be attained after
conducting the steps as in the following list, please
contact the E-TON Co., Ltd. or the authorized
dealer.
Select wire of proper diameter
Status Possible cause
Solution
No output electricity
voltage
Turn to ON position
Power switch is
not turned to ON.
Incorrect connection of
electric pole
(output fuse burned out)
Replace the fuse
115/230VAC Incorrect
selection on switch
Maintenance and repair
is needed.
Excessively low output
electricity voltage
115/230VAC Incorrect
selection on switch
Turn the switch to
the correct position
The battery charging still
can’t reach the floating
charging phase (in green
light)
Battery is aged or damaged
Replace with new battery
Excessively narrow
output wire diameter
–
+
BAT
CHA
CHARGER
