8-4
Indication
Code
Cause
Action
LOCK
FAIL
OLD
NEW
PUSH
PRES
Wrong password.
Enter the old password.
Enter the new password.
SPD0
FAST
Over speed warning.
LOWB
Low battery.
LOWP
Re-enter the password.
TPS0
(over 52KM/HR)
Operate code lock during riding.
Using Power mode during low battery residual
charge.
1. This message will display to remind the
2.This message will display on restarting to
rider that vehicle locking has already been
set success fully.
remind that the vehicle locking has already
been set success fully.
On setting vehicle locking password, this
message will display to remind the rider to
input old password if an old password has
already existed.
ON setting vehicle locking password, this
message will display to remind the rider to
input a new password if there are no password
was set up in system or already enter the
correct password.
During standby mode, this message will dis-
play to remind the user to press confirmation
button to enter into riding page.
After starting. This message will display to
remind the rider if the vehicle still stays in
standby page but the rider intends to turn around
handlebars.
After PRESS is conducted, this message
will display to remind the rider if the confirmation
button is pressed before handle bar is not
yet released.
No operating code lock during riding can terminate this message.
Reducing driving speed as soon as possible.
Recharge battery as soon as possible.
The system will shift back to standard mode automatically and LOWP
will disappear.
1. Rider can switch off safely.
2. Press confirmation button and input password to unlock the vehicle.
Press confirmation button A.
Release throttle handle and press confirmation button to enter into
Release throttle handle and press confirmation button to enter into
riding page.
riding page.
TRBL
SHTG
