7-4
2
3
4
5
2
3
4
T
R
.
.
T
R
.
.
35 Nm (3.5 m•kg, 25.3 ft•lb)
80 Nm (8.0 m•kg, 57.9 ft•lb)
2
3
4
3
4
˔
˔
˕
˕
5
3
FRONT WHEEL / REAR WHEEL
CHAS
ASSEMBLE THE FRONT/ REAR WHEEL
1. Install
• Collar A
• Collar B
• Oil seal
• Bearing
5
• Front brake shoe plate
TIP
Before tightening the wheel axle nut, push down
hard on the handlebar several times and check
if the front fork rebounds smoothly.
Make sure the brake cable is routed properly.
WARNING
რ
NOTICE
4
2
• Rear wheel
• Front wheel
2. Install
3. Tighten
• Rear wheel axle
• Front wheel axle
• Front wheel axle nut
• Rear wheel axle nut
For installation, reverse the removal procedure and
following procedure applies to all the front/ rear
INSTALL THE FRONT/ REAR WHEEL
wheel.
• Front wheel axle
• Wheel bearings
• Oil seal lips
1. Lubricate
Install the front wheel
Install the rear wheel
• Replacing the oil seal should use a new one.
• Install oil seal with their manufacturer brands or
numbers facing outwards.
• Put lithium soap base grease on the bearings
and oil seal lips when installing.
• Using the collar connect outside track of the
bearing while installing.
Lithium-soap-based grease
5
