E-Tech VPPH01 Manual
4
2.1 Standard and Protocols
•
H.323 V4 calling signal protocol
•
MGCP RFC2705
•
SIP RFC3261
•
Net2phone IAX2,WP private protocol
•
IEEE 802.3 10Base-T/100Base-TX RJ-45 port
•
Major G.7XX and gsm610 audio codec
•
Audio codec algorithm include G.711A,G.711u,G.723.1(5.3k/6.3k) and G.729
•
Quick dial setting and user-defined dial plan setting
•
TCP/IP: Internet Transport and Control Protocol
•
RTP: Real-time transport Protocol
•
RTCP: Real-time Transport Control Protocol
•
G.723.1ˇG729 VAD/CNG economical bandwidth
•
G165 16ms Echo cancellation
•
DTMF: Tone Detection and Generation
•
DHCP: Dynamic Host Configuration Protocol
•
PPPoE: Point to Point Protocol Over Ethernet
•
DNS: Domain Name Service
•
NTS: Network Time service
•
Telnet: Remote Host log on Protocol
•
FTP: File Transfer Protocol
•
HTTP: Hyper Text transfer Protocol
•
Build in H.323 proxy support
•
Auto search proxy
2.2 Function Keys
Missed
Press this key to review missed number.
Answered
Press this key to review received number.
Local Num
Press this key to get phone number.
Dialed
Press this key to review dialed number.
Redial
While reviewing missed, received or dialed number, press this key to dial.
current number.
Speak
Press this key to have a call without lifting the handset.
Increase the volumes of handset or speaker; turn over the record backward.
Volume-
Decrease the volumes of handset or speaker; turn over the record forward.
Keypad
With handset picked or pressing speaker, press this key to dial number.
3.0 Installation
•
Connect handset to base: insert handset cord into handset cord jack at the left side of the base.
•
Connect Phone and Power.
•
Place the phone next to Power socket. Plug the power adapter into the Power Jack.
•
Plug the other end of the power cord adapter into the appropriate power.
•
Connect IP phone to Internet: Plug the RJ-45 Ethernet cable into the Ethernet Jack.
•
Plug the other end of the cable into HUB or router.
•
Power on the phone. Turn on the phone by pulling the switch to ON. Verify that yellow, green and red
lights are on together, and then red light is off; green light blinks or is off; yellow light blinks or is on which behalf
the success of starting phone and phone enter into normal standby.
